|
|
|
Bluff 15TFL7260 Steel Dock Board with St
Bluff STEEL DOCK BOARD WITH STEEL CURBS Speed up loading operations, help prevent accidents and reduce labor costs. Anti-skid diamond tread surface and high-visibility beveled curbs for maximum safety. Heavy-duty all-welded steel is ideal for frequent motorized traffic. Maximum impact resistance, strength and safety. Comes with built-in lifting loops. Curb provides full-length handgrip for ease and safety in handling. Safety stop on underside of board fits snugly between truck and dock so board will not move under load. An 11° angle supplied unless another angle of operation is specified. 11" entry lip with rounded nose protects tires. Meets OSHA requirements 1910.30(A). NOTE: CAPACITY is the combined weight of your maximum pallet load and lift truck. Capacity is rated for a single shift with equipment speeds of 3 mph maximum. For multi-shift operations, 3-wheeled forklifts or trucks using paper roll clamp, please add 5000 lbs. to the board capacity.WIDTH should be 12" greater than lift truck or load. The most popular width is 60". Usable width is 4" less than overall width. Stackers, 3-Wheeled Forklifts and other Narrow Aisle Loaders should not be used on a dock board. Refrigerated trucks require special dock boards; please call for information. Application Height:Up to 9" Above Dock with Propane or Gas ForkliftUp to 7" Above Dock with Electric Forlift or Pallet Jack
|
|
|
|
MFG Part No#:
15TFL7260
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Bluff 20C6072 Steel Red Pin Heavy Duty D
Bluff STEEL RED PIN HEAVY DUTY DOCK BOARDDual Positioning Pins on Each Side Offer Added Flexibility and Safety!This Dock Board is the perfect solution for difficult angled parking situations when a trailer just can't get up to the dock (known as park-out). The dock board is even flexible enough to handle refrigerated trailers and overseas containers. Full-length side pockets and four 1" diameter high-strength locking pins on 2" centers offer increased adjustability and safety. Trucks below dock level are able to utilize the board without having to turn it around. Fold-down 11"W x 4-½"H lifting loops (on 27" centers) allow for easy forklift transport and positioning. Contoured curbs prevent runoffs and forklift tire damage. All-welded steel construction for high-traffic, multiple-shift docks. Includes one 7° bend 17-½" from the dock end and one 9° bend 8" from the truck end. Complies with OSHA spec. 1910.30(A) and ANSI spec. MH30.2.NOTE:CAPACITY is the combined weight of your maximum pallet load and lift truck. Capacity is rated for equipment speeds of 3 mph maximum. Stackers and other narrow aisle loaders should not be used on a dock board. WIDTH should be 12" greater than lift truck or load. Usable width is 6" less than overall width. The HT" DIFFERENCE UP is the height difference above the dock. 14% Grade applies to Pallet Trucks and Electric Forklifts. 19% Grade applies to Gas Powered Forklifts.Application Height:Up to 11" Above Dock or 4.5" Below Dock with Propane or Gas ForkliftUp to 8.5" Above Dock or 4.5" Below Dock with Electric Forlift or Pallet Jack
|
|
|
|
MFG Part No#:
20C6072
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Bluff 15T7296 HD Steel Dock Board with L
Bluff HEAVY DUTY STEEL DOCK BOARD WITH LOCK PINSForkliftable Dock Board Allows Easy And Adjustable Positioning Between Truck And Dock.Steel dock board features fold-down lifting loops that allow a forklift to transport and position. Heavy duty dock board includes two 1" diameter positioning pins and two 4-position pin pockets on each side to provide exact and secure placement of the board between the dock and the truck. All welded steel construction makes these dock boards ideal for high traffic cycle and multiple shift docks. Includes one 7° bend 17½" from the dock end and one 9° bend 8" from the truck end. Comply with OSHA spec. 1910.30(A) and ANSI spec. MH30.2.NOTE:CAPACITY is the combined weight of your maximum pallet load and lift truck. Capacity is rated for a single shift with equipment speeds of 3 mph maximum.WIDTH should be 12 greater than lift truck or load. Usable width is 6 less than overall width.Stackers and other narrow aisle loaders should not be used on a dockboard. Refrigerated trucks require special dockboards; please call for information. The HT. DIFFERENCE UP is the height difference above the dock.Application Height:Up to 15" Above Dock or 6.5" Below Dock with Propane or Gas ForkliftUp to 12" Above Dock or 6.5" Below Dock with Electric Forlift or Pallet Jack
|
|
|
|
MFG Part No#:
15T7296
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Bluff 20T7284 HD Steel Dock Board with L
Bluff HEAVY DUTY STEEL DOCK BOARD WITH LOCK PINSForkliftable Dock Board allows easy and Adjustable Positioning between Truck and Dock.Steel Dock Board features fold-down lifting loops that allow a forklift to transport and position. Heavy duty dock board includes two 1" diameter positioning pins and two 4-position pin pockets on each side to provide exact and secure placement of the board between the dock and the truck. All welded steel construction makes these dock boards ideal for high traffic cycle and multiple shift docks. Includes one 7° bend 17½" from the dock end and one 9° bend 8" from the truck end. Comply with OSHA spec. 1910.30(A) and ANSI spec. MH30.2.NOTE:CAPACITY is the combined weight of your maximum pallet load and lift truck. Capacity is rated for a single shift with equipment speeds of 3 mph maximum.WIDTH should be 12" greater than lift truck or load. Usable width is 6" less than overall width.Stackers and other narrow aisle loaders should not be used on a dock board. Refrigerated trucks require special dock boards; please call for information. The HT." DIFFERENCE UP is the height difference above the dock.Application Height:Up to 13" Above Dock or 5.5" Below Dock with Propane or Gas ForkliftUp to 10" Above Dock or 5.5" Below Dock with Electric Forlift or Pallet Jack
|
|
|
|
MFG Part No#:
20T7284
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Bluff 20C7272 Steel Red Pin Heavy Duty D
Bluff STEEL RED PIN HEAVY DUTY DOCK BOARDDual Positioning Pins on Each Side Offer Added Flexibility and Safety!This Dock Board is the perfect solution for difficult angled parking situations when a trailer just can't get up to the dock (known as park-out). The dock board is even flexible enough to handle refrigerated trailers and overseas containers. Full-length side pockets and four 1" diameter high-strength locking pins on 2" centers offer increased adjustability and safety. Trucks below dock level are able to utilize the board without having to turn it around. Fold-down 11"W x 4-½"H lifting loops (on 27" centers) allow for easy forklift transport and positioning. Contoured curbs prevent runoffs and forklift tire damage. All-welded steel construction for high-traffic, multiple-shift docks. Includes one 7° bend 17-½" from the dock end and one 9° bend 8" from the truck end. Complies with OSHA spec. 1910.30(A) and ANSI spec. MH30.2.NOTE:CAPACITY is the combined weight of your maximum pallet load and lift truck. Capacity is rated for equipment speeds of 3 mph maximum. Stackers and other narrow aisle loaders should not be used on a dock board. WIDTH should be 12" greater than lift truck or load. Usable width is 6" less than overall width. The HT" DIFFERENCE UP is the height difference above the dock. 14% Grade applies to Pallet Trucks and Electric Forklifts. 19% Grade applies to Gas Powered Forklifts.Application Height:Up to 11" Above Dock or 4.5" Below Dock with Propane or Gas ForkliftUp to 8.5" Above Dock or 4.5" Below Dock with Electric Forlift or Pallet Jack
|
|
|
|
MFG Part No#:
20C7272
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Bluff 15C6072 Steel Red Pin Heavy Duty D
Bluff STEEL RED PIN HEAVY DUTY DOCK BOARDDual Positioning Pins on Each Side Offer Added Flexibility and Safety!This Dock Board is the perfect solution for difficult angled parking situations when a trailer just can't get up to the dock (known as park-out). The dock board is even flexible enough to handle refrigerated trailers and overseas containers. Full-length side pockets and four 1" diameter high-strength locking pins on 2" centers offer increased adjustability and safety. Trucks below dock level are able to utilize the board without having to turn it around. Fold-down 11"W x 4-½"H lifting loops (on 27" centers) allow for easy forklift transport and positioning. Contoured curbs prevent runoffs and forklift tire damage. All-welded steel construction for high-traffic, multiple-shift docks. Includes one 7° bend 17-½" from the dock end and one 9° bend 8" from the truck end. Complies with OSHA spec. 1910.30(A) and ANSI spec. MH30.2.NOTE:CAPACITY is the combined weight of your maximum pallet load and lift truck. Capacity is rated for equipment speeds of 3 mph maximum. Stackers and other narrow aisle loaders should not be used on a dock board. WIDTH should be 12" greater than lift truck or load. Usable width is 6" less than overall width. The HT" DIFFERENCE UP is the height difference above the dock. 14% Grade applies to Pallet Trucks and Electric Forklifts. 19% Grade applies to Gas Powered Forklifts.Application Height:Up to 11" Above Dock or 4.5" Below Dock with Propane or Gas ForkliftUp to 8.5" Above Dock or 4.5" Below Dock with Electric Forlift or Pallet Jack
|
|
|
|
MFG Part No#:
15C6072
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Bluff 15C7284 Steel Red Pin Heavy Duty D
Bluff STEEL RED PIN HEAVY DUTY DOCK BOARDDual Positioning Pins on Each Side Offer Added Flexibility and Safety!This Dock Board is the perfect solution for difficult angled parking situations when a trailer just can't get up to the dock (known as park-out). The dock board is even flexible enough to handle refrigerated trailers and overseas containers. Full-length side pockets and four 1" diameter high-strength locking pins on 2" centers offer increased adjustability and safety. Trucks below dock level are able to utilize the board without having to turn it around. Fold-down 11"W x 4-½"H lifting loops (on 27" centers) allow for easy forklift transport and positioning. Contoured curbs prevent runoffs and forklift tire damage. All-welded steel construction for high-traffic, multiple-shift docks. Includes one 7° bend 17-½" from the dock end and one 9° bend 8" from the truck end. Complies with OSHA spec. 1910.30(A) and ANSI spec. MH30.2.NOTE:CAPACITY is the combined weight of your maximum pallet load and lift truck. Capacity is rated for equipment speeds of 3 mph maximum. Stackers and other narrow aisle loaders should not be used on a dock board. WIDTH should be 12" greater than lift truck or load. Usable width is 6" less than overall width. The HT" DIFFERENCE UP is the height difference above the dock. 14% Grade applies to Pallet Trucks and Electric Forklifts. 19% Grade applies to Gas Powered Forklifts.Application Height:Up to 13" Above Dock or 5.5" Below Dock with Propane or Gas ForkliftUp to 10" Above Dock or 5.5" Below Dock with Electric Forlift or Pallet Jack
|
|
|
|
MFG Part No#:
15C7284
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Bluff 15C7296 Steel Red Pin Heavy Duty D
Bluff STEEL RED PIN HEAVY DUTY DOCK BOARDDual Positioning Pins on Each Side Offer Added Flexibility and Safety!This Dock Board is the perfect solution for difficult angled parking situations when a trailer just can't get up to the dock (known as park-out). The dock board is even flexible enough to handle refrigerated trailers and overseas containers. Full-length side pockets and four 1" diameter high-strength locking pins on 2" centers offer increased adjustability and safety. Trucks below dock level are able to utilize the board without having to turn it around. Fold-down 11"W x 4-½"H lifting loops (on 27" centers) allow for easy forklift transport and positioning. Contoured curbs prevent runoffs and forklift tire damage. All-welded steel construction for high-traffic, multiple-shift docks. Includes one 7° bend 17-½" from the dock end and one 9° bend 8" from the truck end. Complies with OSHA spec. 1910.30(A) and ANSI spec. MH30.2.NOTE:CAPACITY is the combined weight of your maximum pallet load and lift truck. Capacity is rated for equipment speeds of 3 mph maximum. Stackers and other narrow aisle loaders should not be used on a dock board. WIDTH should be 12" greater than lift truck or load. Usable width is 6" less than overall width. The HT" DIFFERENCE UP is the height difference above the dock. 14% Grade applies to Pallet Trucks and Electric Forklifts. 19% Grade applies to Gas Powered Forklifts.Application Height:Up to 15" Above Dock or 6.5" Below Dock with Propane or Gas ForkliftUp to 12" Above Dock or 6.5" Below Dock with Electric Forlift or Pallet Jack
|
|
|
|
MFG Part No#:
15C7296
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Bluff 20T7296 HD Steel Dock Board with L
Bluff HEAVY DUTY STEEL DOCK BOARD WITH LOCK PINSForkliftable Dock Board allows easy and Adjustable Positioning between Truck and Dock.Steel Dock Board features fold-down lifting loops that allow a forklift to transport and position. Heavy duty dock board includes two 1" diameter positioning pins and two 4-position pin pockets on each side to provide exact and secure placement of the board between the dock and the truck. All welded steel construction makes these dock boards ideal for high traffic cycle and multiple shift docks. Includes one 7° bend 17½" from the dock end and one 9° bend 8" from the truck end. Comply with OSHA spec. 1910.30(A) and ANSI spec. MH30.2.NOTE:CAPACITY is the combined weight of your maximum pallet load and lift truck. Capacity is rated for a single shift with equipment speeds of 3 mph maximum.WIDTH should be 12" greater than lift truck or load. Usable width is 6" less than overall width.Stackers and other narrow aisle loaders should not be used on a dock board. Refrigerated trucks require special dock boards; please call for information. The HT." DIFFERENCE UP is the height difference above the dock.Application Height:Up to 15" Above Dock or 6.5" Below Dock with Propane or Gas ForkliftUp to 12" Above Dock or 6.5" Below Dock with Electric Forlift or Pallet Jack
|
|
|
|
MFG Part No#:
20T7296
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Bluff 20C7284 Steel Red Pin Heavy Duty D
Bluff STEEL RED PIN HEAVY DUTY DOCK BOARDDual Positioning Pins on Each Side Offer Added Flexibility and Safety!This Dock Board is the perfect solution for difficult angled parking situations when a trailer just can't get up to the dock (known as park-out). The dock board is even flexible enough to handle refrigerated trailers and overseas containers. Full-length side pockets and four 1" diameter high-strength locking pins on 2" centers offer increased adjustability and safety. Trucks below dock level are able to utilize the board without having to turn it around. Fold-down 11"W x 4-½"H lifting loops (on 27" centers) allow for easy forklift transport and positioning. Contoured curbs prevent runoffs and forklift tire damage. All-welded steel construction for high-traffic, multiple-shift docks. Includes one 7° bend 17-½" from the dock end and one 9° bend 8" from the truck end. Complies with OSHA spec. 1910.30(A) and ANSI spec. MH30.2.NOTE:CAPACITY is the combined weight of your maximum pallet load and lift truck. Capacity is rated for equipment speeds of 3 mph maximum. Stackers and other narrow aisle loaders should not be used on a dock board. WIDTH should be 12" greater than lift truck or load. Usable width is 6" less than overall width. The HT" DIFFERENCE UP is the height difference above the dock. 14% Grade applies to Pallet Trucks and Electric Forklifts. 19% Grade applies to Gas Powered Forklifts.Application Height:Up to 13" Above Dock or 5.5" Below Dock with Propane or Gas ForkliftUp to 10" Above Dock or 5.5" Below Dock with Electric Forlift or Pallet Jack
|
|
|
|
MFG Part No#:
20C7284
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Bluff 20C6084 Steel Red Pin Heavy Duty D
Bluff STEEL RED PIN HEAVY DUTY DOCK BOARDDual Positioning Pins on Each Side Offer Added Flexibility and Safety!This Dock Board is the perfect solution for difficult angled parking situations when a trailer just can't get up to the dock (known as park-out). The dock board is even flexible enough to handle refrigerated trailers and overseas containers. Full-length side pockets and four 1" diameter high-strength locking pins on 2" centers offer increased adjustability and safety. Trucks below dock level are able to utilize the board without having to turn it around. Fold-down 11"W x 4-½"H lifting loops (on 27" centers) allow for easy forklift transport and positioning. Contoured curbs prevent runoffs and forklift tire damage. All-welded steel construction for high-traffic, multiple-shift docks. Includes one 7° bend 17-½" from the dock end and one 9° bend 8" from the truck end. Complies with OSHA spec. 1910.30(A) and ANSI spec. MH30.2.NOTE:CAPACITY is the combined weight of your maximum pallet load and lift truck. Capacity is rated for equipment speeds of 3 mph maximum. Stackers and other narrow aisle loaders should not be used on a dock board. WIDTH should be 12" greater than lift truck or load. Usable width is 6" less than overall width. The HT" DIFFERENCE UP is the height difference above the dock. 14% Grade applies to Pallet Trucks and Electric Forklifts. 19% Grade applies to Gas Powered Forklifts.Application Height:Up to 13" Above Dock or 5.5" Below Dock with Propane or Gas ForkliftUp to 10" Above Dock or 5.5" Below Dock with Electric Forlift or Pallet Jack
|
|
|
|
MFG Part No#:
20C6084
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Bluff 20C8484 Steel Red Pin Heavy Duty D
Bluff STEEL RED PIN HEAVY DUTY DOCK BOARDDual Positioning Pins on Each Side Offer Added Flexibility and Safety!This Dock Board is the perfect solution for difficult angled parking situations when a trailer just can't get up to the dock (known as park-out). The dock board is even flexible enough to handle refrigerated trailers and overseas containers. Full-length side pockets and four 1" diameter high-strength locking pins on 2" centers offer increased adjustability and safety. Trucks below dock level are able to utilize the board without having to turn it around. Fold-down 11"W x 4-½"H lifting loops (on 27" centers) allow for easy forklift transport and positioning. Contoured curbs prevent runoffs and forklift tire damage. All-welded steel construction for high-traffic, multiple-shift docks. Includes one 7° bend 17-½" from the dock end and one 9° bend 8" from the truck end. Complies with OSHA spec. 1910.30(A) and ANSI spec. MH30.2.NOTE:CAPACITY is the combined weight of your maximum pallet load and lift truck. Capacity is rated for equipment speeds of 3 mph maximum. Stackers and other narrow aisle loaders should not be used on a dock board.WIDTH should be 12" greater than lift truck or load. Usable width is 6" less than overall width. The HT" DIFFERENCE UP is the height difference above the dock.14% Grade applies to Pallet Trucks and Electric Forklifts. 19% Grade applies to Gas Powered Forklifts.Application Height:Up to 13" Above Dock or 5.5" Below Dock with Propane or Gas ForkliftUp to 10" Above Dock or 5.5" Below Dock with Electric Forlift or Pallet Jack
|
|
|
|
MFG Part No#:
20C8484
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Bluff 15C8472 Steel Red Pin Heavy Duty D
Bluff STEEL RED PIN HEAVY DUTY DOCK BOARDDual Positioning Pins on Each Side Offer Added Flexibility and Safety!This Dock Board is the perfect solution for difficult angled parking situations when a trailer just can't get up to the dock (known as park-out). The dock board is even flexible enough to handle refrigerated trailers and overseas containers. Full-length side pockets and four 1" diameter high-strength locking pins on 2" centers offer increased adjustability and safety. Trucks below dock level are able to utilize the board without having to turn it around. Fold-down 11"W x 4-½"H lifting loops (on 27" centers) allow for easy forklift transport and positioning. Contoured curbs prevent runoffs and forklift tire damage. All-welded steel construction for high-traffic, multiple-shift docks. Includes one 7° bend 17-½" from the dock end and one 9° bend 8" from the truck end. Complies with OSHA spec. 1910.30(A) and ANSI spec. MH30.2.NOTE:CAPACITY is the combined weight of your maximum pallet load and lift truck. Capacity is rated for equipment speeds of 3 mph maximum. Stackers and other narrow aisle loaders should not be used on a dockboard. WIDTH should be 12" greater than lift truck or load. Usable width is 6" less than overall width. The HT" DIFFERENCE UP is the height difference above the dock. 14% Grade applies to Pallet Trucks and Electric Forklifts. 19% Grade applies to Gas Powered Forklifts.Application Height:Up to 11" Above Dock or 4.5" Below Dock with Propane or Gas ForkliftUp to 8.5" Above Dock or 4.5" Below Dock with Electric Forlift or Pallet Jack
|
|
|
|
MFG Part No#:
15C8472
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Bluff 20C8496 Steel Red Pin Heavy Duty D
Bluff STEEL RED PIN HEAVY DUTY DOCK BOARDDual Positioning Pins on Each Side Offer Added Flexibility and Safety!This Dock Board is the perfect solution for difficult angled parking situations when a trailer just can't get up to the dock (known as park-out). The dock board is even flexible enough to handle refrigerated trailers and overseas containers. Full-length side pockets and four 1" diameter high-strength locking pins on 2" centers offer increased adjustability and safety. Trucks below dock level are able to utilize the board without having to turn it around. Fold-down 11"W x 4-½"H lifting loops (on 27" centers) allow for easy forklift transport and positioning. Contoured curbs prevent runoffs and forklift tire damage. All-welded steel construction for high-traffic, multiple-shift docks. Includes one 7° bend 17-½" from the dock end and one 9° bend 8" from the truck end. Complies with OSHA spec. 1910.30(A) and ANSI spec. MH30.2.NOTE:CAPACITY is the combined weight of your maximum pallet load and lift truck. Capacity is rated for equipment speeds of 3 mph maximum. Stackers and other narrow aisle loaders should not be used on a dock board.WIDTH should be 12" greater than lift truck or load. Usable width is 6" less than overall width. The HT" DIFFERENCE UP is the height difference above the dock.14% Grade applies to Pallet Trucks and Electric Forklifts. 19% Grade applies to Gas Powered Forklifts.Application Height:Up to 15" Above Dock or 6.5" Below Dock with Propane or Gas ForkliftUp to 12" Above Dock or 6.5" Below Dock with Electric Forlift or Pallet Jack
|
|
|
|
MFG Part No#:
20C8496
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Bluff Speedy Board Aluminum Dock Board,
Bluff Speedy Board ALUMINUM DOCK BOARD WITH WELDED ALUMINUM CURBS & FORKLIFT TINE NOTCHESLightweight Dock Boards offer easier placement and retrieval.This all-welded aluminum dock board is ideal for low-to-medium volume dock applications using a pallet jack or a forklift. Heavy duty aluminum treadplate dock board features fully welded extruded aluminum curbs and safety restraint legs for maximum corrosion resistance and controlled spark production. Beveled ends offer smooth entry/exit and board includes an 11° bend and an 11" lip on the truck end (customizations are available; call for more information). Each Speedy Board includes integral Fork Cut-outs for quick, safe placement with a forklift. Comply with OSHA spec. 1910.30(A) and ANSI spec. MH30.2.NOTE:CAPACITY is the combined weight of your maximum pallet load and lift truck. Capacity is rated for equipment speeds of 3 mph maximum. Stackers and other narrow aisle loaders should not be used on a dock board. WIDTH should be 12" greater than lift truck or load. Usable width is 6" less than overall width. The HT" DIFFERENCE UP is the height difference above the dock. 14% Grade applies to Pallet Trucks and Electric Forklifts. 19% Grade applies to Gas Powered Forklifts.Application Height:Up to 9" Above Dock with Propane or Gas ForkliftUp to 7" Above Dock with Electric Forlift or Pallet Jack
|
|
|
|
MFG Part No#:
15ATD7260
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Bluff 20C7296 Steel Red Pin Heavy Duty D
Bluff STEEL RED PIN HEAVY DUTY DOCK BOARDDual Positioning Pins on Each Side Offer Added Flexibility and Safety!This Dock Board is the perfect solution for difficult angled parking situations when a trailer just can't get up to the dock (known as park-out). The dock board is even flexible enough to handle refrigerated trailers and overseas containers. Full-length side pockets and four 1" diameter high-strength locking pins on 2" centers offer increased adjustability and safety. Trucks below dock level are able to utilize the board without having to turn it around. Fold-down 11"W x 4-½"H lifting loops (on 27" centers) allow for easy forklift transport and positioning. Contoured curbs prevent runoffs and forklift tire damage. All-welded steel construction for high-traffic, multiple-shift docks. Includes one 7° bend 17-½" from the dock end and one 9° bend 8" from the truck end. Complies with OSHA spec. 1910.30(A) and ANSI spec. MH30.2.NOTE:CAPACITY is the combined weight of your maximum pallet load and lift truck. Capacity is rated for equipment speeds of 3 mph maximum. Stackers and other narrow aisle loaders should not be used on a dock board. WIDTH should be 12" greater than lift truck or load. Usable width is 6" less than overall width. The HT" DIFFERENCE UP is the height difference above the dock. 14% Grade applies to Pallet Trucks and Electric Forklifts. 19% Grade applies to Gas Powered Forklifts.Application Height:Up to 15" Above Dock or 6.5" Below Dock with Propane or Gas ForkliftUp to 12" Above Dock or 6.5" Below Dock with Electric Forlift or Pallet Jack
|
|
|
|
MFG Part No#:
20C7296
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|