|
|
|
Bluff 20SB7236 Speedy Board Dock Board 7
Bluff STEEL DOCK BOARD WITH FORKLIFT TINE NOTCHESBluff Speedy Board Dock Board offers integral Fork Cut-outs for Easy and Safe Maneuvering.This dock board allows the fork lift driver to move, set and retrieve the dock plate without leaving the seat of the forklift. The leading edge of the board has twin "notched" holes that allow the driver to scoop the board and move it to and from the dock without having to raise lifting loops or secure chains into place. This saves time and increases productivity at high-traffic cycle dock operations, and enhances dock safety since the driver is most at risk when outside the forklift cab. All welded steel construction with anti-skid diamond tread surface provides maximum safety. Loading dock board has tapered curbs that help prevent tire damage and beveled ends offer smooth entry and exit. Safety stop on underside of the plate fits snugly between truck and dock so it will not shift under load. Complies with OSHA spec. 1910.30(A) and ANSI spec. MH30.2.20,000 Lb. Capacity Dock Board has a 7° bend 17½" from the truck end and a 9° bend 8" from the dock end.NOTE:CAPACITY is the combined weight of your maximum pallet load and lift truck. Capacity is rated for a single shift with equipment speeds of 3 mph maximum.WIDTH should be 12" greater than lift truck or load. Usable width is 6" less than overall width.Stackers and other narrow aisle loaders should not be used on a dockboard. Refrigerated trucks require special dock plates; please call for information. The HT" DIFFERENCE UP is the height difference above the dock.Application Height:Up to 5" Above Dock with Propane or Gas ForkliftUp to 3" Above Dock with Electric Forlift or Pallet Jack
|
|
|
|
MFG Part No#:
20SB7236
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Bluff 15T8448 HD Steel Dock Board with L
Bluff HEAVY DUTY STEEL DOCK BOARD WITH LOCK PINSForkliftable Dock Board Allows Easy And Adjustable Positioning Between Truck And Dock.Steel dock board features fold-down lifting loops that allow a forklift to transport and position. Heavy duty dock board includes two 1" diameter positioning pins and two 4-position pin pockets on each side to provide exact and secure placement of the board between the dock and the truck. All welded steel construction makes these dock boards ideal for high traffic cycle and multiple shift docks. Includes one 7° bend 17½" from the dock end and one 9° bend 8" from the truck end. Comply with OSHA spec. 1910.30(A) and ANSI spec. MH30.2.NOTE:CAPACITY is the combined weight of your maximum pallet load and lift truck. Capacity is rated for a single shift with equipment speeds of 3 mph maximum.WIDTH should be 12" greater than lift truck or load. Usable width is 6" less than overall width.Stackers and other narrow aisle loaders should not be used on a dockboard. Refrigerated trucks require special dockboards; please call for information. The HT." DIFFERENCE UP is the height difference above the dock.Application Height:Up to 7" Above Dock or 3" Below Dock with Propane or Gas ForkliftUp to 5" Above Dock or 3" Below Dock with Electric Forlift or Pallet Jack
|
|
|
|
MFG Part No#:
15T8448
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Bluff 20SB6072 Speedy Board Dock Board 6
Bluff STEEL DOCK BOARD WITH FORKLIFT TINE NOTCHESBluff Speedy Board Dock Board offers integral Fork Cut-outs for Easy and Safe Maneuvering.This dock board allows the fork lift driver to move, set and retrieve the dock plate without leaving the seat of the forklift. The leading edge of the board has twin "notched" holes that allow the driver to scoop the board and move it to and from the dock without having to raise lifting loops or secure chains into place. This saves time and increases productivity at high-traffic cycle dock operations, and enhances dock safety since the driver is most at risk when outside the forklift cab. All welded steel construction with anti-skid diamond tread surface provides maximum safety. Loading dock board has tapered curbs that help prevent tire damage and beveled ends offer smooth entry and exit. Safety stop on underside of the plate fits snugly between truck and dock so it will not shift under load. Complies with OSHA spec. 1910.30(A) and ANSI spec. MH30.2.20,000 Lb. Capacity Dock Board has a 7° bend 17½" from the truck end and a 9° bend 8" from the dock end.NOTE:CAPACITY is the combined weight of your maximum pallet load and lift truck. Capacity is rated for a single shift with equipment speeds of 3 mph maximum.WIDTH should be 12" greater than lift truck or load. Usable width is 6" less than overall width.Stackers and other narrow aisle loaders should not be used on a dockboard. Refrigerated trucks require special dock plates; please call for information. The HT" DIFFERENCE UP is the height difference above the dock.Application Height:Up to 11" Above Dock with Propane or Gas ForkliftUp to 8.5" Above Dock with Electric Forlift or Pallet Jack
|
|
|
|
MFG Part No#:
20SB6072
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Bluff 20SB7260 Speedy Board Dock Board 7
Bluff STEEL DOCK BOARD WITH FORKLIFT TINE NOTCHESBluff Speedy Board Dock Board offers integral Fork Cut-outs for Easy and Safe Maneuvering.This dock board allows the fork lift driver to move, set and retrieve the dock plate without leaving the seat of the forklift. The leading edge of the board has twin "notched" holes that allow the driver to scoop the board and move it to and from the dock without having to raise lifting loops or secure chains into place. This saves time and increases productivity at high-traffic cycle dock operations, and enhances dock safety since the driver is most at risk when outside the forklift cab. All welded steel construction with anti-skid diamond tread surface provides maximum safety. Loading dock board has tapered curbs that help prevent tire damage and beveled ends offer smooth entry and exit. Safety stop on underside of the plate fits snugly between truck and dock so it will not shift under load. Complies with OSHA spec. 1910.30(A) and ANSI spec. MH30.2.20,000 Lb. Capacity Dock Board has a 7° bend 17½" from the truck end and a 9° bend 8" from the dock end.NOTE:CAPACITY is the combined weight of your maximum pallet load and lift truck. Capacity is rated for a single shift with equipment speeds of 3 mph maximum.WIDTH should be 12" greater than lift truck or load. Usable width is 6" less than overall width.Stackers and other narrow aisle loaders should not be used on a dockboard. Refrigerated trucks require special dock plates; please call for information. The HT" DIFFERENCE UP is the height difference above the dock.Application Height:Up to 9" Above Dock with Propane or Gas ForkliftUp to 7" Above Dock with Electric Forlift or Pallet Jack
|
|
|
|
MFG Part No#:
20SB7260
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Bluff Speedy Board Aluminum Dock Board,
Bluff Speedy Board ALUMINUM DOCK BOARD WITH WELDED ALUMINUM CURBS & FORKLIFT TINE NOTCHESLightweight Dock Boards offer easier placement and retrieval.This all-welded aluminum dock board is ideal for low-to-medium volume dock applications using a pallet jack or a forklift. Heavy duty aluminum treadplate dock board features fully welded extruded aluminum curbs and safety restraint legs for maximum corrosion resistance and controlled spark production. Beveled ends offer smooth entry/exit and board includes an 11° bend and an 11" lip on the truck end (customizations are available; call for more information). Each Speedy Board includes integral Fork Cut-outs for quick, safe placement with a forklift. Comply with OSHA spec. 1910.30(A) and ANSI spec. MH30.2.NOTE:CAPACITY is the combined weight of your maximum pallet load and lift truck. Capacity is rated for equipment speeds of 3 mph maximum. Stackers and other narrow aisle loaders should not be used on a dock board. WIDTH should be 12" greater than lift truck or load. Usable width is 6" less than overall width. The HT" DIFFERENCE UP is the height difference above the dock. 14% Grade applies to Pallet Trucks and Electric Forklifts. 19% Grade applies to Gas Powered Forklifts.Application Height:Up to 9" Above Dock with Propane or Gas ForkliftUp to 7" Above Dock with Electric Forlift or Pallet Jack
|
|
|
|
MFG Part No#:
15ATD6060
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Bluff 20T6060 HD Steel Dock Board with L
Bluff HEAVY DUTY STEEL DOCK BOARD WITH LOCK PINSForkliftable Dock Board allows easy and Adjustable Positioning between Truck and Dock.Steel Dock Board features fold-down lifting loops that allow a forklift to transport and position. Heavy duty dock board includes two 1" diameter positioning pins and two 4-position pin pockets on each side to provide exact and secure placement of the board between the dock and the truck. All welded steel construction makes these dock boards ideal for high traffic cycle and multiple shift docks. Includes one 7° bend 17½" from the dock end and one 9° bend 8" from the truck end. Comply with OSHA spec. 1910.30(A) and ANSI spec. MH30.2.NOTE:CAPACITY is the combined weight of your maximum pallet load and lift truck. Capacity is rated for a single shift with equipment speeds of 3 mph maximum.WIDTH should be 12" greater than lift truck or load. Usable width is 6" less than overall width.Stackers and other narrow aisle loaders should not be used on a dock board. Refrigerated trucks require special dock boards; please call for information. The HT." DIFFERENCE UP is the height difference above the dock.Application Height:Up to 9" Above Dock or 3.5" Below Dock with Propane or Gas ForkliftUp to 7" Above Dock or 3.5" Below Dock with Electric Forlift or Pallet Jack
|
|
|
|
MFG Part No#:
20T6060
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Bluff Speedy Board Aluminum Dock Board,
Bluff Speedy Board ALUMINUM DOCK BOARD WITH WELDED ALUMINUM CURBS & FORKLIFT TINE NOTCHESLightweight Dock Boards offer easier placement and retrieval.This all-welded aluminum dock board is ideal for low-to-medium volume dock applications using a pallet jack or a forklift. Heavy duty aluminum treadplate dock board features fully welded extruded aluminum curbs and safety restraint legs for maximum corrosion resistance and controlled spark production. Beveled ends offer smooth entry/exit and board includes an 11° bend and an 11" lip on the truck end (customizations are available; call for more information). Each Speedy Board includes integral Fork Cut-outs for quick, safe placement with a forklift. Comply with OSHA spec. 1910.30(A) and ANSI spec. MH30.2.NOTE:CAPACITY is the combined weight of your maximum pallet load and lift truck. Capacity is rated for equipment speeds of 3 mph maximum. Stackers and other narrow aisle loaders should not be used on a dock board. WIDTH should be 12" greater than lift truck or load. Usable width is 6" less than overall width. The HT" DIFFERENCE UP is the height difference above the dock. 14% Grade applies to Pallet Trucks and Electric Forklifts. 19% Grade applies to Gas Powered Forklifts.Application Height:Up to 7" Above Dock with Propane or Gas ForkliftUp to 5" Above Dock with Electric Forlift or Pallet Jack
|
|
|
|
MFG Part No#:
15ATD7248
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Bluff 20T8472 HD Steel Dock Board with L
Bluff HEAVY DUTY STEEL DOCK BOARD WITH LOCK PINSForkliftable Dock Board Allows Easy And Adjustable Positioning Between Truck And Dock.Steel dock board features fold-down lifting loops that allow a forklift to transport and position. Heavy duty dock board includes two 1" diameter positioning pins and two 4-position pin pockets on each side to provide exact and secure placement of the board between the dock and the truck. All welded steel construction makes these dock boards ideal for high traffic cycle and multiple shift docks. Includes one 7° bend 17½" from the dock end and one 9° bend 8" from the truck end. Comply with OSHA spec. 1910.30(A) and ANSI spec. MH30.2.NOTE:CAPACITY is the combined weight of your maximum pallet load and lift truck. Capacity is rated for a single shift with equipment speeds of 3 mph maximum.WIDTH should be 12" greater than lift truck or load. Usable width is 6" less than overall width.Stackers and other narrow aisle loaders should not be used on a dockboard. Refrigerated trucks require special dockboards; please call for information. The HT." DIFFERENCE UP is the height difference above the dock.Application Height:Up to 11" Above Dock or 4.5" Below Dock with Propane or Gas ForkliftUp to 8.5" Above Dock or 4.5" Below Dock with Electric Forlift or Pallet Jack
|
|
|
|
MFG Part No#:
20T8472
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Bluff 15C7272 Steel Red Pin Heavy Duty D
Bluff STEEL RED PIN HEAVY DUTY DOCK BOARDDual Positioning Pins on Each Side Offer Added Flexibility and Safety!This Dock Board is the perfect solution for difficult angled parking situations when a trailer just can't get up to the dock (known as park-out). The dock board is even flexible enough to handle refrigerated trailers and overseas containers. Full-length side pockets and four 1" diameter high-strength locking pins on 2" centers offer increased adjustability and safety. Trucks below dock level are able to utilize the board without having to turn it around. Fold-down 11"W x 4-½"H lifting loops (on 27" centers) allow for easy forklift transport and positioning. Contoured curbs prevent runoffs and forklift tire damage. All-welded steel construction for high-traffic, multiple-shift docks. Includes one 7° bend 17-½" from the dock end and one 9° bend 8" from the truck end. Complies with OSHA spec. 1910.30(A) and ANSI spec. MH30.2.NOTE:CAPACITY is the combined weight of your maximum pallet load and lift truck. Capacity is rated for equipment speeds of 3 mph maximum. Stackers and other narrow aisle loaders should not be used on a dock board. WIDTH should be 12" greater than lift truck or load. Usable width is 6" less than overall width. The HT" DIFFERENCE UP is the height difference above the dock. 14% Grade applies to Pallet Trucks and Electric Forklifts. 19% Grade applies to Gas Powered Forklifts.Application Height:Up to 11" Above Dock or 4.5" Below Dock with Propane or Gas ForkliftUp to 8.5" Above Dock or 4.5" Below Dock with Electric Forlift or Pallet Jack
|
|
|
|
MFG Part No#:
15C7272
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Bluff Speedy Board Aluminum Dock Board,
Bluff Speedy Board ALUMINUM DOCK BOARD WITH WELDED ALUMINUM CURBS & FORKLIFT TINE NOTCHESLightweight Dock Boards offer easier placement and retrieval.This all-welded aluminum dock board is ideal for low-to-medium volume dock applications using a pallet jack or a forklift. Heavy duty aluminum treadplate dock board features fully welded extruded aluminum curbs and safety restraint legs for maximum corrosion resistance and controlled spark production. Beveled ends offer smooth entry/exit and board includes an 11° bend and an 11" lip on the truck end (customizations are available; call for more information). Each Speedy Board includes integral Fork Cut-outs for quick, safe placement with a forklift. Comply with OSHA spec. 1910.30(A) and ANSI spec. MH30.2.NOTE:CAPACITY is the combined weight of your maximum pallet load and lift truck. Capacity is rated for equipment speeds of 3 mph maximum. Stackers and other narrow aisle loaders should not be used on a dock board. WIDTH should be 12" greater than lift truck or load. Usable width is 6" less than overall width. The HT" DIFFERENCE UP is the height difference above the dock. 14% Grade applies to Pallet Trucks and Electric Forklifts. 19% Grade applies to Gas Powered Forklifts.Application Height:Up to 9" Above Dock with Propane or Gas ForkliftUp to 7" Above Dock with Electric Forlift or Pallet Jack
|
|
|
|
MFG Part No#:
10ATD7260
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Bluff 20T7260 HD Steel Dock Board with L
Bluff HEAVY DUTY STEEL DOCK BOARD WITH LOCK PINSForkliftable Dock Board allows easy and Adjustable Positioning between Truck and Dock.Steel Dock Board features fold-down lifting loops that allow a forklift to transport and position. Heavy duty dock board includes two 1" diameter positioning pins and two 4-position pin pockets on each side to provide exact and secure placement of the board between the dock and the truck. All welded steel construction makes these dock boards ideal for high traffic cycle and multiple shift docks. Includes one 7° bend 17½" from the dock end and one 9° bend 8" from the truck end. Comply with OSHA spec. 1910.30(A) and ANSI spec. MH30.2.NOTE:CAPACITY is the combined weight of your maximum pallet load and lift truck. Capacity is rated for a single shift with equipment speeds of 3 mph maximum.WIDTH should be 12" greater than lift truck or load. Usable width is 6" less than overall width.Stackers and other narrow aisle loaders should not be used on a dock board. Refrigerated trucks require special dock boards; please call for information. The HT." DIFFERENCE UP is the height difference above the dock.Application Height:Up to 9" Above Dock or 3.5" Below Dock with Propane or Gas ForkliftUp to 7" Above Dock or 3.5" Below Dock with Electric Forlift or Pallet Jack
|
|
|
|
MFG Part No#:
20T7260
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Bluff 20C7266 Steel Red Pin Heavy Duty D
Bluff STEEL RED PIN HEAVY DUTY DOCK BOARDDual Positioning Pins on Each Side Offer Added Flexibility and Safety!This Dock Board is the perfect solution for difficult angled parking situations when a trailer just can't get up to the dock (known as park-out). The dock board is even flexible enough to handle refrigerated trailers and overseas containers. Full-length side pockets and four 1" diameter high-strength locking pins on 2" centers offer increased adjustability and safety. Trucks below dock level are able to utilize the board without having to turn it around. Fold-down 11"W x 4-½"H lifting loops (on 27" centers) allow for easy forklift transport and positioning. Contoured curbs prevent runoffs and forklift tire damage. All-welded steel construction for high-traffic, multiple-shift docks. Includes one 7° bend 17-½" from the dock end and one 9° bend 8" from the truck end. Complies with OSHA spec. 1910.30(A) and ANSI spec. MH30.2.NOTE:CAPACITY is the combined weight of your maximum pallet load and lift truck. Capacity is rated for equipment speeds of 3 mph maximum. Stackers and other narrow aisle loaders should not be used on a dockboard. WIDTH should be 12" greater than lift truck or load. Usable width is 6" less than overall width. The HT" DIFFERENCE UP is the height difference above the dock. 14% Grade applies to Pallet Trucks and Electric Forklifts. 19% Grade applies to Gas Powered Forklifts.Application Height:Up to 10" Above Dock or 4" Below Dock with Propane or Gas ForkliftUp to 8" Above Dock or 4" Below Dock with Electric Forlift or Pallet Jack
|
|
|
|
MFG Part No#:
20C7266
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Bluff 10SB7260 Speedy Board Dock Board 7
Bluff STEEL DOCK BOARD WITH FORKLIFT TINE NOTCHESBluff Speedy Board Dock Board offers integral Fork Cut-outs for Easy and Safe Maneuvering.This dock board allows the fork lift driver to move, set and retrieve the dock plate without leaving the seat of the forklift. The leading edge of the board has twin "notched" holes that allow the driver to scoop the board and move it to and from the dock without having to raise lifting loops or secure chains into place. This saves time and increases productivity at high-traffic cycle dock operations, and enhances dock safety since the driver is most at risk when outside the forklift cab. All welded steel construction with anti-skid diamond tread surface provides maximum safety. Loading dock board has tapered curbs that help prevent tire damage and beveled ends offer smooth entry and exit. Safety stop on underside of the plate fits snugly between truck and dock so it will not shift under load. Complies with OSHA spec. 1910.30(A) and ANSI spec. MH30.2.10,000 Lb. Capacity Dock Board features an 11° bend on the truck end.NOTE:CAPACITY is the combined weight of your maximum pallet load and lift truck. Capacity is rated for a single shift with equipment speeds of 3 mph maximum.WIDTH should be 12" greater than lift truck or load. Usable width is 6" less than overall width.Stackers and other narrow aisle loaders should not be used on a dockboard. Refrigerated trucks require special dock plates; please call for information. The HT" DIFFERENCE UP is the height difference above the dock.Application Height:Up to 9" Above Dock with Propane or Gas ForkliftUp to 7" Above Dock with Electric Forlift or Pallet Jack
|
|
|
|
MFG Part No#:
10SB7260
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Bluff 20SB7272 Speedy Board Dock Board 7
Bluff STEEL DOCK BOARD WITH FORKLIFT TINE NOTCHESBluff Speedy Board Dock Board offers integral Fork Cut-outs for Easy and Safe Maneuvering.This dock board allows the fork lift driver to move, set and retrieve the dock plate without leaving the seat of the forklift. The leading edge of the board has twin "notched" holes that allow the driver to scoop the board and move it to and from the dock without having to raise lifting loops or secure chains into place. This saves time and increases productivity at high-traffic cycle dock operations, and enhances dock safety since the driver is most at risk when outside the forklift cab. All welded steel construction with anti-skid diamond tread surface provides maximum safety. Loading dock board has tapered curbs that help prevent tire damage and beveled ends offer smooth entry and exit. Safety stop on underside of the plate fits snugly between truck and dock so it will not shift under load. Complies with OSHA spec. 1910.30(A) and ANSI spec. MH30.2.20,000 Lb. Capacity Dock Board has a 7° bend 17½" from the truck end and a 9° bend 8" from the dock end.NOTE:CAPACITY is the combined weight of your maximum pallet load and lift truck. Capacity is rated for a single shift with equipment speeds of 3 mph maximum.WIDTH should be 12" greater than lift truck or load. Usable width is 6" less than overall width.Stackers and other narrow aisle loaders should not be used on a dockboard. Refrigerated trucks require special dock plates; please call for information. The HT" DIFFERENCE UP is the height difference above the dock.Application Height:Up to 11" Above Dock with Propane or Gas ForkliftUp to 8.5" Above Dock with Electric Forlift or Pallet Jack
|
|
|
|
MFG Part No#:
20SB7272
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Bluff 15C6078 Steel Red Pin Heavy Duty D
Bluff STEEL RED PIN HEAVY DUTY DOCK BOARDDual Positioning Pins on Each Side Offer Added Flexibility and Safety!This Dock Board is the perfect solution for difficult angled parking situations when a trailer just can't get up to the dock (known as park-out). The dock board is even flexible enough to handle refrigerated trailers and overseas containers. Full-length side pockets and four 1" diameter high-strength locking pins on 2" centers offer increased adjustability and safety. Trucks below dock level are able to utilize the board without having to turn it around. Fold-down 11"W x 4-½"H lifting loops (on 27" centers) allow for easy forklift transport and positioning. Contoured curbs prevent runoffs and forklift tire damage. All-welded steel construction for high-traffic, multiple-shift docks. Includes one 7° bend 17-½" from the dock end and one 9° bend 8" from the truck end. Complies with OSHA spec. 1910.30(A) and ANSI spec. MH30.2.NOTE:CAPACITY is the combined weight of your maximum pallet load and lift truck. Capacity is rated for equipment speeds of 3 mph maximum. Stackers and other narrow aisle loaders should not be used on a dock board. WIDTH should be 12" greater than lift truck or load. Usable width is 6" less than overall width. The HT" DIFFERENCE UP is the height difference above the dock. 14% Grade applies to Pallet Trucks and Electric Forklifts. 19% Grade applies to Gas Powered Forklifts.Application Height:Up to 12" Above Dock or 5" Below Dock with Propane or Gas ForkliftUp to 9" Above Dock or 5" Below Dock with Electric Forlift or Pallet Jack
|
|
|
|
MFG Part No#:
15C6078
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Bluff 20T6072 HD Steel Dock Board with L
Bluff HEAVY DUTY STEEL DOCK BOARD WITH LOCK PINSForkliftable Dock Board allows easy and Adjustable Positioning between Truck and Dock.Steel Dock Board features fold-down lifting loops that allow a forklift to transport and position. Heavy duty dock board includes two 1" diameter positioning pins and two 4-position pin pockets on each side to provide exact and secure placement of the board between the dock and the truck. All welded steel construction makes these dock boards ideal for high traffic cycle and multiple shift docks. Includes one 7° bend 17½" from the dock end and one 9° bend 8" from the truck end. Comply with OSHA spec. 1910.30(A) and ANSI spec. MH30.2.NOTE:CAPACITY is the combined weight of your maximum pallet load and lift truck. Capacity is rated for a single shift with equipment speeds of 3 mph maximum.WIDTH should be 12" greater than lift truck or load. Usable width is 6" less than overall width.Stackers and other narrow aisle loaders should not be used on a dock board. Refrigerated trucks require special dock boards; please call for information. The HT." DIFFERENCE UP is the height difference above the dock.Application Height:Up to 11" Above Dock or 4.5" Below Dock with Propane or Gas ForkliftUp to 8.5" Above Dock or 4.5" Below Dock with Electric Forlift or Pallet Jack
|
|
|
|
MFG Part No#:
20T6072
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Bluff 20C8472 Steel Red Pin Heavy Duty D
Bluff STEEL RED PIN HEAVY DUTY DOCK BOARDDual Positioning Pins on Each Side Offer Added Flexibility and Safety!This Dock Board is the perfect solution for difficult angled parking situations when a trailer just can't get up to the dock (known as park-out). The dock board is even flexible enough to handle refrigerated trailers and overseas containers. Full-length side pockets and four 1" diameter high-strength locking pins on 2" centers offer increased adjustability and safety. Trucks below dock level are able to utilize the board without having to turn it around. Fold-down 11"W x 4-½"H lifting loops (on 27" centers) allow for easy forklift transport and positioning. Contoured curbs prevent runoffs and forklift tire damage. All-welded steel construction for high-traffic, multiple-shift docks. Includes one 7° bend 17-½" from the dock end and one 9° bend 8" from the truck end. Complies with OSHA spec. 1910.30(A) and ANSI spec. MH30.2.NOTE:CAPACITY is the combined weight of your maximum pallet load and lift truck. Capacity is rated for equipment speeds of 3 mph maximum. Stackers and other narrow aisle loaders should not be used on a dock board. WIDTH should be 12" greater than lift truck or load. Usable width is 6" less than overall width. The HT" DIFFERENCE UP is the height difference above the dock. 14% Grade applies to Pallet Trucks and Electric Forklifts. 19% Grade applies to Gas Powered Forklifts.Application Height:Up to 11" Above Dock or 4.5" Below Dock with Propane or Gas ForkliftUp to 8.5" Above Dock or 4.5" Below Dock with Electric Forlift or Pallet Jack
|
|
|
|
MFG Part No#:
20C8472
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Bluff 20C8448 Steel Red Pin Heavy Duty D
Bluff STEEL RED PIN HEAVY DUTY DOCK BOARDDual Positioning Pins on Each Side Offer Added Flexibility and Safety!This Dock Board is the perfect solution for difficult angled parking situations when a trailer just can't get up to the dock (known as park-out). The dock board is even flexible enough to handle refrigerated trailers and overseas containers. Full-length side pockets and four 1" diameter high-strength locking pins on 2" centers offer increased adjustability and safety. Trucks below dock level are able to utilize the board without having to turn it around. Fold-down 11"W x 4-½"H lifting loops (on 27" centers) allow for easy forklift transport and positioning. Contoured curbs prevent runoffs and forklift tire damage. All-welded steel construction for high-traffic, multiple-shift docks. Includes one 7° bend 17-½" from the dock end and one 9° bend 8" from the truck end. Complies with OSHA spec. 1910.30(A) and ANSI spec. MH30.2.NOTE:CAPACITY is the combined weight of your maximum pallet load and lift truck. Capacity is rated for equipment speeds of 3 mph maximum. Stackers and other narrow aisle loaders should not be used on a dock board. WIDTH should be 12" greater than lift truck or load. Usable width is 6" less than overall width. The HT" DIFFERENCE UP is the height difference above the dock. 14% Grade applies to Pallet Trucks and Electric Forklifts. 19% Grade applies to Gas Powered Forklifts.Application Height:Up to 7" Above Dock or 3" Below Dock with Propane or Gas ForkliftUp to 5" Above Dock or 3" Below Dock with Electric Forlift or Pallet Jack
|
|
|
|
MFG Part No#:
20C8448
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Bluff 15C8466 Steel Red Pin Heavy Duty D
Bluff STEEL RED PIN HEAVY DUTY DOCK BOARDDual Positioning Pins on Each Side Offer Added Flexibility and Safety!This Dock Board is the perfect solution for difficult angled parking situations when a trailer just can't get up to the dock (known as park-out). The dock board is even flexible enough to handle refrigerated trailers and overseas containers. Full-length side pockets and four 1" diameter high-strength locking pins on 2" centers offer increased adjustability and safety. Trucks below dock level are able to utilize the board without having to turn it around. Fold-down 11"W x 4-½"H lifting loops (on 27" centers) allow for easy forklift transport and positioning. Contoured curbs prevent runoffs and forklift tire damage. All-welded steel construction for high-traffic, multiple-shift docks. Includes one 7° bend 17-½" from the dock end and one 9° bend 8" from the truck end. Complies with OSHA spec. 1910.30(A) and ANSI spec. MH30.2.NOTE:CAPACITY is the combined weight of your maximum pallet load and lift truck. Capacity is rated for equipment speeds of 3 mph maximum. Stackers and other narrow aisle loaders should not be used on a dockboard. WIDTH should be 12" greater than lift truck or load. Usable width is 6" less than overall width. The HT" DIFFERENCE UP is the height difference above the dock. 14% Grade applies to Pallet Trucks and Electric Forklifts. 19% Grade applies to Gas Powered Forklifts.Application Height:Up to 10" Above Dock or 4" Below Dock with Propane or Gas ForkliftUp to 8" Above Dock or 4" Below Dock with Electric Forlift or Pallet Jack
|
|
|
|
MFG Part No#:
15C8466
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|
|
|
|
|
Bluff 15T7272 HD Steel Dock Board with L
Bluff HEAVY DUTY STEEL DOCK BOARD WITH LOCK PINSForkliftable Dock Board Allows Easy And Adjustable Positioning Between Truck And Dock.Steel dock board features fold-down lifting loops that allow a forklift to transport and position. Heavy duty dock board includes two 1" diameter positioning pins and two 4-position pin pockets on each side to provide exact and secure placement of the board between the dock and the truck. All welded steel construction makes these dock boards ideal for high traffic cycle and multiple shift docks. Includes one 7° bend 17½" from the dock end and one 9° bend 8" from the truck end. Comply with OSHA spec. 1910.30(A) and ANSI spec. MH30.2.NOTE:CAPACITY is the combined weight of your maximum pallet load and lift truck. Capacity is rated for a single shift with equipment speeds of 3 mph maximum.WIDTH should be 12 greater than lift truck or load. Usable width is 6 less than overall width.Stackers and other narrow aisle loaders should not be used on a dockboard. Refrigerated trucks require special dockboards; please call for information. The HT. DIFFERENCE UP is the height difference above the dock.Application Height:Up to 11" Above Dock or 4.5" Below Dock with Propane or Gas ForkliftUp to 8.5" Above Dock or 4.5" Below Dock with Electric Forlift or Pallet Jack
|
|
|
|
MFG Part No#:
15T7272
|
|
|
|
IN STOCK
|
|
Big Box Store Price:$0.00
|
|
|
|
|
|